Compression Moulding Press 100 Ton

Compression Moulding Press 100 Ton:

Type of the press : Pillar type (Down Stroke)

Capacity of the press : 100 Ton

No. of Cylinder : 1 No. Double Acting.

· Bore of the Cylinder 250 mm

· Stroke of the Cylinder 250 mm

· No. of Daylight 1 No.

· Max. Daylight Gap 300mm

· Min. Daylight Gap 50 mm

· Heating Platen Size 350 x 350 mm

· Bed Size 550 x 350 mm

· Approaching Speed 25 mm/sec

· Pressing Speed 5 mm/sec

· Return Speed 40mm/sec

· Maximum Working Pressure 210 Kg/Cm 2

· Drive Motor 3.7 KW (5 HP) 3Ph, 50 Hz

· Mode of Heating Electric Heaters in Heating Platen (in Press)

· No. of Heating Zones 2 ( Top & Bottom )

· Heater Capacity per Zone 3 KW

· Heating range Max. Up to 250 0 C

· Heating Control By PID Temperature Controllers one per zone

· Cycle Control Through PLC